Chevrolet Sonic Repair Manual: Heated Oxygen Sensor Resistance Learn Reset Caution

Caution:

When replacing the HO2S perform the following:

• A code clear with a scan tool, regardless of whether or not a DTC is set
• HO2S heater resistance learn reset with a scan tool, where available

Perform the above in order to reset the HO2S resistance learned value and avoid possible HO2S failure.

Heated Oxygen Sensor Replacement - Sensor 2

Heated Oxygen Sensor Replacement - Sensor 2 Callout Component Name 1 Heated Oxygen Sensor 2 Warning: In or ...

Heated Oxygen and Oxygen Sensor Caution

Caution: Do not remove the pigtail from either the heated oxygen sensor (HO2S) or the oxygen sensor (O2S). Removing the pigtail or the connector will affect sensor operation. Handle the ox ...

Other materials:

Torque Lock (Automatic Transmission)
If you are parking on a hill and you do not shift the transmission into P (Park) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may find it difficult to pull the shift lever out of P (Park). This is called “torque lock.” To prevent t ...

Special Tools
Illustration Tool Number/ Description CH-24319-B CH-43631 J-24319-B J-43631 Ball Joint Remover CH-50559 Wheel Hub / Bearing Remover / Installer Kit CH-5 ...

Drive Belt Installation
Special Tools EN-955 Locking Pins EN-48488 Holding Wrench For equivalent regional tools, refer to Special Tools. Note: Ensure that the drive belt tensioner is held with EN-955?E locking pin. Install the drive belt. Move the drive belt tensioner clockwise until EN- ...