The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners.
See Radio Frequency Statement.
Valve Guide Reaming, and Valve and Seat Grinding
Valve Cleaning Procedure
Use soft bristle wire brush to clean any carbon build-up from the valve
head. DO NOT use a wire brush on any part of the valve stem. The valve stem
is chrome plated to provide enhanced wear characteristics. Wire brushing
the stem could remove the chr ...
Water Inlet Replacement (LUV)
Removal Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling.
Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct
Replacement.
Remove the engine coolant temperature sensor connector (1) and the radiator
ou ...
Exhaust Camshaft Replacement
Removal Procedure
Remove the camshaft intake and exhaust sprocket. Refer to Camshaft Intake
and Exhaust Sprocket Replacement.
Remove and DISCARD the camshaft sprocket bolts (2) and the camshaft
position exciter wheels (1).
Allow the both camshaft ...