|
Callout |
Component Name |
|---|---|
|
1 |
Radio Antenna Procedure
Rotate the mast counterclockwise in order to release the mast from the antenna base. |
Radio Antenna Base Replacement
Wireless Communication Interface Antenna ReplacementFront Side Door Outer Panel Replacement
Removal Procedure
Note: According to different corrosion warranties, only the regional
mandatory joining methods are allowed.
Disable the SIR System. Refer to SIR Disabling and Enabling.
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconn ...
Relay Replacement (Attached to Wire Harness)
Removal Procedure
Locate the relay. Refer to the Master Electrical Component List to locate
the relay in the vehicle.
Remove any fasteners which hold the relay in place.
Remove any connector position assurance (CPA) devices or secondary locks.
Note: Use care w ...
Torque Converter Housing Cleaning and Inspection
Torque Converter Housing Cleaning and Inspection
Callout
Component Name
Caution: After cleaning the transmission components, allow
to air dry. Do not use cloth or paper towels in order to dry any transmission
compone ...