Chevrolet Sonic Repair Manual: Rear Side Door Window Weatherstrip Replacement (Hatchback)

Chevrolet Sonic Repair Manual / Body / Body Exterior / Weatherstripping / Rear Side Door Window Weatherstrip Replacement (Hatchback)

Rear Side Door Window Weatherstrip Replacement
Callout	Component Name
Preliminary Procedure Remove the rear side door window . Refer to Rear Side Door Window Replacement.
1	Rear Side Door Window Weatherstrip Procedure Remove the rear side door water deflector. Remove the weatherstrip from the front and rear lower window guides. Grasp both upper corners, pull downward releasing the weatherstrip from the door frame. Insert the weatherstrip downward in the window guides until fully seated. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guides. Inspect the door window for proper operation before installing the door trim panel.

Rear Side Door Weatherstrip Replacement - Door Side

Rear Side Door Weatherstrip Replacement - Door Side Callout Component Name 1 Rear Side Door Weatherstrip Procedure ...

Rear Side Door Window Weatherstrip Replacement (Sedan)

Rear Side Door Window Weatherstrip Replacement Callout Component Name Preliminary Procedures The rear door side window weatherstrip ...

Other materials:

Rear Vision Camera (RVC)
This vehicle may have the RVC system. Read this entire section before using it. The RVC system can assist the driver when backing up by displaying a view of the area behind the vehicle. Warning The RVC system does not display children, pedestrians, bicyclists, animals, or any other object loc ...

Radio/Audio System Description and Operation
The entertainment system on this vehicle may have several different configurations available to it. To determine the specific configuration of the vehicle, please see the Service Parts ID Label, and refer to RPO Code List. Each item in the list below represents topics covered in detail below. ...

Full-Cut Method Description
Note: If corrosion of the pinch-weld flange is present, or if sheet metal repairs or replacements are required, refinish the pinch-weld flange in order to present a clean, primer-only surface. If paint repairs are required, mask the flange bonding area, prior to applying th ...

0.1388