Chevrolet Sonic manuals

Chevrolet Sonic Owner's Manual: Setting the Time and Date

1. Press 2. Press time and date settings, and then set time and date. 3. Press, and then press settings.
2. Press time and date settings, and then set time and date. 3. Press to adjust the value. 4. Press or
. to adjust the value. 4. Press
Automatic Clock Sync.


Setting the Month and Day Format
1. Press , and then press settings. 2. Press time and date settings. 3. Press < or > to set the date display to DD/MM/YYYY (day/ month/year), MM/DD/YYYY (month/day/year), or YYYY/MM/ DD (yea ...

Automatic Clock Sync
1. Press , and then press settings. 2. Press time and date settings, and then automatic clock sync. 3. Select On to display the real time or Off to display the time set by the user. 4. Press . ...

Other materials:

Rear Wheel Bearing and Hub Replacement (Disc Brake)
Special Tools EN–45059 Angle Meter For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Insta ...

Steering Linkage Inner Tie Rod Inspection
Special Tools GE-8001 Dial Indicator Set For equivalent regional tools, refer to Special Tools. Note: This inspection procedure does not supersede local government required inspections that have more stringent requirements. Turn the ignition key to the ON position with the eng ...

Tire and Wheel Assembly Runout Measurement - On-Vehicle
Raise and support the vehicle. Closely inspect each tire for proper and even bead seating. If any of the tire beads were not properly or evenly seated, reseat the tire bead, then proceed to step 4. Refer to Tire and Wheel Removal and Installation. Wrap the circumferenc ...

© 2014-2026 Copyright www.csmans.com
 
0.0044