Clean the outside of the windshield with glass cleaner.
Clean rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking.
Replace the wiper blades if they are worn or damaged. Damage can be caused by extreme dusty conditions, sand, salt, heat, sun, snow, and ice.
Air Intakes
WeatherstripsEnvironmental Fallout (Acid Rain)
Caution: Refer to Clearcoat/Ultraviolet Screeners Caution.
Note: Always refer to the manufacturer's packaged instructions for
the detailed procedures of materials used for compounding and/or polishing.
Since the severity of the condition varies from area to area, proper diagno ...
Brake Fluid Level Indicator Switch Replacement
Removal Procedure
Disconnect the brake fluid level indicator switch electrical connector.
Using a small, flat-bladed tool, lift the locking tab on the underside
of the brake fluid level indicator switch (1) and remove the switch.
Inspect the master cyli ...
Brake Rotor Assembled Lateral Runout Measurement
Special Tools
CH-41013 Rotor Surfacing Kit
CH-42450-A Wheel Hub Resurfacing Kit
CH-45101 Hub and Wheel Runout Gauge
CH-45101-100 Conical Brake Rotor Washers
For equivalent regional tools, refer to Special Tools.
Warning: Refer to Brake Dust Warning.
Note:
B ...