|
Callout |
Component Name |
|---|---|
|
1 |
Front Compartment Front Insulator Cover Screw (Qty:?€‰2) Caution: Refer to Fastener Caution.
2.5?€‰Y (22?€‰lb?€‰in) |
|
2 |
Front Compartment Front Insulator Cover Bolt (Qty:?€‰4) Tighten
22?€‰Y (16?€‰lb?€‰ft) |
|
3 |
Front Compartment Front Insulator Cover |
Drivetrain and Front Suspension Frame Replacement
Front Wheelhouse Liner Inner Front Extension Replacement (Left SIde)Wheel Alignment and Tire Balance
The tires and wheels were aligned and balanced at the factory to provide the
longest tire life and best overall performance. Adjustments to wheel alignment and
tire balancing are not necessary on a regular basis. Consider an alignment check
if there is unusual tire wear or the vehicle is signi ...
Water Pump Pulley Installation
Note: Counterhold the crankshaft balancer. The belt has to be
installed for this procedure.
Install the water pump pulley (2) to the water pump (3).
Caution: Refer to Fastener Caution.
Install the 3 water pump pulley bolts (1) with lockin ...
Neutral - Engine Running (Gen 1)
When the gear selector is moved to the Neutral (N) position, the hydraulic and
electrical system operation is identical to Park (P) range. However, if Neutral
is selected after the vehicle was operating in Reverse (R), the normally-high 35R
pressure control solenoid 2 is commanded OFF and the ...