Chevrolet Sonic Owner's Manual: Personalization Menu (Radio with Touchscreen)

Chevrolet Sonic Owner's Manual / Instruments and Controls / Vehicle Personalization / Personalization Menu (Radio with Touchscreen)

Settings can be made with the ignition ON and the vehicle not moving.

Use the audio system controls to access the personalization menus for customizing vehicle features.

The following are all possible personalization features. Depending on the vehicle, some may not be available.

(Home): Press to access the Home
Page Menu.

or
: Press to scroll through the menus
or setup items.

: Press to exit, or return to the
previous screen or menu.

To access the menu:

1. Press 2. Press Settings. .

2. Press Settings.

The following list of menu items may be available:

Time & Date Settings
Radio Settings
Connection Settings
Vehicle Settings
Language
Text Scroll
Touch Beep Sound
Max Startup Volume
System Version
DivX® VOD

Press the menu item to select it. Each of the menus is detailed in the following information.

Settings menus and functions may vary depending on vehicle option.

Remote Lock, Unlock, Start

Select Remote Lock, Unlock, Start and the following may display: Remote Unlock Feedback Remote Lock Feedback Remote Door Unlock Remote Unlock Feedback When on, the exterior lamps will flas ...

Time & Date Settings

Select to change the settings: Set Time Format: Select 12h or 24h. Set Date Format: Press < or > to select the date display. Set Time & Date: Select, then press or to adjust th ...

Other materials:

Vehicle Personalization
Personalization Menu (Radio without Touchscreen) Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not be available. CONFIG (Confi ...

Body Hinge Pillar Lower Reinforcement Replacement
Removal Procedure Warning: Refer to Approved Equipment for Collision Repair Warning. Disable the SIR system. Refer to SIR Disabling and Enabling. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection. Remove all ...

Tire and Wheel Balancing (Collet Cone Selection)
Important: Never use the hub cap bore to center the wheel onto the balancer. The pilot bore (on the hub side of the wheel) is machined to be concentric to very tight non - standard tolerances. The bottom cap bore is not machined to this same degree of precision. Accurate mac ...

0.007