Chevrolet Sonic Owner's Manual: Remote Lock, Unlock, Start
Select Remote Lock, Unlock, Start and the following may display:
- Remote Unlock Feedback
- Remote Lock Feedback
- Remote Door Unlock
Remote Unlock Feedback
When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter.
Select On or Off.
Remote Lock Feedback
This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter.
Select Lights and Horn, Lights Only, Horn Only, or Off.
Remote Door Unlock
This allows selection of which doors will unlock when pressing
on the RKE transmitter.
Select All Doors or Driver Door Only. When set to Driver Door Only, the driver
door will unlock the first time is pressed
and all doors will unlock when is pressed
a second time. When set to All Doors, all of the doors will unlock at the first
press of .
Power Door Locks
Select Power Door Locks and the following may display:
Auto Door Unlock
Unlock Door Anti Lock Out
Delayed Door Lock
Auto Door Unlock
This allows selection of which of the doors will automa ...
Personalization Menu (Radio with Touchscreen)
Settings can be made with the ignition ON and the vehicle not moving.
Use the audio system controls to access the personalization menus for customizing
vehicle features.
The following are all poss ...
Other materials:
Brake Fluid Level Indicator Switch Replacement
Removal Procedure
Disconnect the brake fluid level indicator switch
electrical connector.
Using a small, flat-bladed tool, lift the locking
tab on the underside of the brake fluid level indicator switch (1) and remove
the switch.
Inspect the maste ...
Engine Oil Cooler Housing Installation
Clean the engine oil cooler housing to thermostat housing sealing surfaces.
Install 2 NEW gaskets.
h.\.\,.\\..,v:..//
Install the engine oil cooler inlet pipe (3).
Install the engine oil cooler housing (1) and the 5 engine oil cooler bolts (2)
and t ...
How to activate/deactivate the automatic brake hold function
To enable the automatic brake hold feature in your Nissan Armada, ensure the
ignition switch is in the ON position, then press the automatic brake hold switch
1. Once activated, the indicator light on the switch 2 will illuminate, confirming
that the system is ready for operation.
When ...
0.0078