Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
1 |
Rear Wheelhouse Panel Liner Screw (Qty:?€‰4) Caution: Refer to Fastener Caution.
3?€‰Y (27?€‰lb?€‰in) |
2 |
Rear Wheelhouse Panel Liner Nut (Qty:?€‰4) Tighten
2?€‰Y (18?€‰lb?€‰in) |
3 |
Rear Wheelhouse Panel Liner Push-In Retainer |
4 |
Rear Wheelhouse Panel Liner |
Brake Fluid
The brake/clutch master cylinder reservoir is filled with DOT 3 brake fluid as
indicated on the reservoir cap. See Engine Compartment Overview for
the location of the reservoir.
There are only two reasons why the fluid level in the reservoir might go down:
The fluid level goes down ...
Plastic Collar Quick Connect Fitting Service
Removal Procedure
Warning: Refer to Gasoline/Gasoline Vapors Warning.
Note: There are several types of Plastic Collar Fuel and Evaporative
Emission Quick Connect Fittings used on this vehicle.
Bartholomew?€‰(1)
Q Release?€‰(2)
...
Airbag Steering Wheel Module Replacement
Removal Procedure
Warning: Refer to SIR Inflator Module Handling and Storage
Warning.
Warning: Refer to SIR Warning.
Disable the SIR system. Refer to SIR Disabling and Enabling.
Rotate the steering wheel 180 degrees.
Using a bl ...