Callout |
Component Name |
---|---|
Preliminary Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling. |
|
1 |
Throttle Body Heater Inlet Pipe Procedure
|
Adhesive Installation of Windshields
Warning: Refer to Glass and Sheet Metal Handling Warning.
Use a urethane adhesive systems which meet GM Specification GM?€‰3651G.
Remove all mounds or loose pieces of urethane adhesive from the pinchweld
area.
If the original window is being reused, remove all but approxi ...
Instrument Panel Lower Intermediate Reinforcement Replacement
Instrument Panel Lower Intermediate Reinforcement Replacement
Callout
Component Name
Preliminary Procedures
Disable the SIR system. Refer to SIR Disabling and Enabling.
Remove the passenger inflatable restraint instrument ...
Steering Gear Boot Replacement
Special Tools
CH-804 Tensioner
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the steering linkage outer tie rod. Refer to Steering Linkage
Outer Tie Rod Rep ...