Chevrolet Sonic Repair Manual: Throttle Body Removal

Throttle Body Installation

Install the throttle body (2) and a NEW throttle body seal ring (1). Caution: Refer to Fastener Caution. Install the 4 throttle body bolts (3) and ti ...

Tools and Equipment

Special tools are listed and illustrated throughout this section with a complete listing at the end of the section. These tools, or their equivalents, are specially designed to quickly and safely ...

Other materials:

Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the rear storage area. 1. Lift the trim cover. 2. Remove the tire sealant canister (1) and the compressor (2). To store the tire sealant canister and compressor: 1. Attach the sealant/air hose to the sealant canister inlet valve. 2. Return the ...

Fabric/Carpet/Suede
Start by vacuuming the surface using a soft brush attachment. If a rotating brush attachment is being used during vacuuming, only use it on the floor carpet. Before cleaning, gently remove as much of the soil as possible using one of the following techniques: Gently blot liquids with a pap ...

Camshaft Position Actuator Solenoid Valve Installation
Caution: The camshaft position actuator solenoid valves must be kept parallel to the engine front cover during removal and installation. The camshaft position actuator solenoid valves can be damaged if they become wedged or stuck during this process. Install the 2̴ ...