|
Callout |
Component Name |
|---|---|
|
1 |
Front Differential Carrier Baffle Bolts M6 x 25 (Qty: 2) |
|
2 |
Front Differential Carrier Baffle |
|
3 |
Front Differential Ring Gear Retainer Note: Note the direction of the taper to ensure proper installation. |
|
4 |
Front Differential Ring Gear |
|
5 |
Fluid Pump Bolts M8 x 33 (Qty: 8) |
|
6 |
Fluid Pump Assembly |
|
7 |
Torque Converter and Differential Housing Seal |
Transmission Fluid Pump, Front Differential Carrier Baffle, and Front Differential
Ring Gear Removal (6T30)
DriveshaftsRepairing Damaged Wire Insulation
If the wire insulation has been chafed, or broken, enough to show the conductive
portion of the wire, and the wire is not damaged, determine the length of insulation
that needs to be repaired. If the repair is less than 280?€‰mm (11?€‰in), cut the
wire within the damaged area. Then sli ...
Brake Pressure Modulator Valve Bracket Replacement
Removal Procedure
Remove the brake pressure modulator valve (BPMV) and bracket assembly.
Refer to Brake Pressure Modulator Valve Replacement.
Remove the BPMV bolts (1).
Remove the BPMV bracket.
Installation Procedure
Install the BPMV br ...
Water Pump Pulley Removal
Loosen the 3 water pump pulley bolts (2) while holding up the water pump
pulley hub with a wrench.
Remove the 3 water pump pulley bolts (2).
Remove the water pump pulley (1).
...