 
| Callout | Component Name | 
|---|---|
| Preliminary Procedure 
 Disconnect the radiator outlet hose from the water inlet. Refer to Water Inlet Replacement. | |
| 1 | Turbocharger Wastegate Regulator Solenoid Valve Fastener Caution: Refer to Fastener Caution. 
 8 Y (71 lb in) | 
| 2 | Turbocharger Wastegate Regulator Solenoid Valve Hose (Qty: 3) | 
| 3 | Turbocharger Wastegate Regulator Solenoid Valve Procedure 
 Disconnect the electrical connector. | 
 Turbocharger System Description
Turbocharger System Description Charge Air Cooler Inlet Air Hose Replacement
Charge Air Cooler Inlet Air Hose ReplacementParking Brake Lever Replacement
  		
	Removal Procedure 
	
	
		Remove the front floor console. Refer to Front Floor Console Replacement.
		
		Ensure that the park brake lever is in the fully released position.
		
		Disconnect the electrical connector from the park brake warning lamp 
		switch. 
		
		
		Using ONLY HAND TOOL ...
   	
K20 Engine Control Module: Programming and Setup
  		Special Tools
EL-49642 SPS Programming Support Tool 
For equivalent regional tools, refer to Special Tools.
	Note: 
	
		DO NOT program a control module unless directed to by a service procedure 
		or a service bulletin. If the control module is not properly configured 
		with the correct  ...
   	
Transmission General Description
  		The Hydra-matic 6T30/40/45/50 is a fully automatic, 6-speed, front-wheel drive, 
electronic-controlled transmission. It consists primarily of a 4-element torque 
converter, a compound planetary gear set, friction and mechanical clutch assemblies, 
and a hydraulic pressurization and control system ...