Chevrolet Sonic Repair Manual: Water Pump Installation
- Clean the sealing surfaces and the 3 coolant pump threads.
- Install NEW gasket.
- Install the coolant pump (1).
- Install 5 NEW bolts (2) and tighten to 8 Y (71 lb in)
.
Caution:
Refer to Fastener Caution.
Caution:
Refer to Torque-to-Yield Fastener Caution.
Coolant Pump
...
Water Pump Pulley Installation
Note: Counterhold the crankshaft balancer. The belt has to be
installed for this procedure.
Install the water pump pulley (2) to the water pump (3).
Caution: R ...
Other materials:
Parking and Turn Signal Lamp Bulb Replacement
Parking and Turn Signal Lamp Bulb Replacement
Callout
Component Name
Preliminary Procedures
Open and support the hood assembly.
Reposition the air cleaner inlet duct on the passenger side of the
engine compartment.
Re ...
Strut and Shock Absorber Inspection (Shock Absorber)
Note: The shock absorber assembly DOES NOT have to be removed from
the vehicle to perform the following inspection procedure.
Note: A light film of oil on the top portion of the lower shock absorber
tube is normal. DO NOT replace the shock absorber for this condition.
Condition ...
Transmission Replacement (With 1.6L or 1.8L Engine)
Removal Procedure
Remove the battery tray. Refer to
Battery Tray Replacement.
Without draining the coolant or removing the hoses,
remove and position aside the radiator surge tank. Refer to
Radiator Surge Tank Replacement.
Remove the transmission range selector lever c ...
0.0072