Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Ambient Air Temperature Sensor Replacement

Chevrolet Sonic Repair Manual / HVAC / HVAC Controls & Sensors / Ambient Air Temperature Sensor Replacement


\/\\//\\\\(in

Ambient Air Temperature Sensor Replacement

Callout

Component Name

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the front bumper fascia opening lower cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement.

1

Ambient Air Temperature Sensor

Procedure

  1. Disconnect the electrical connector.
  2. Unsnap the sensor from the front grill assembly.
  3. Drive the vehicle at constant 40 MPH to update the ambient air temperature sensor reading to the current ambient temperature.
Mode Control Cable Replacement (LHD)
Mode Control Cable Replacement Callout Component Name Preliminary Procedures Remove the heater and air conditioning control.Refer t ...

Ventilation Doors & Ducts
...

Other materials:

Engine Block Disassemble
Remove the cylinder head locating (1, 2). Remove the oil pressure switch (1). Remove the knock sensor bolt (2) and the knock sensor (1). Clean the thread. Remove the oil flow check valve (1). Remove the oil pressure rel ...

Engine Oil Cooler Inlet Pipe Replacement (LUW)
Removal Procedure Drain the cooling system. Refer to Cooling System Draining and Filling. Remove the exhaust manifold with catalytic converter. Refer to Exhaust Manifold with Catalytic Converter Replacement. Remove the engine oil cooler pipe bolts (1) an ...

Transmission Fluid Drain and Fill
Draining Procedure Note: The fluid check bolt at the front of the transmission may not be opened. The transmission fluid drained out during the pre-delivery inspection may be re-used. New transmission fluid must be used during servicing work. The transmis ...

В© 2014-2019 Copyright www.csmans.com
   
0.0702