Side Window Defogger Outlet Grille Replacement
Front License Plate Bracket ReplacementLock Cylinder Coding - Ignition
The ignition lock cylinder uses 8 key cut positions, 1–8. The ignition cylinder
tumblers (3) are located on alternate sides of the cylinder (5). They are not snap-in
and are not self-retaining. It follows the key code with the first tumbler being
the first depth of the ...
Rear Disc Brake Pads Replacement
Removal Procedure
Warning: Refer to Brake Dust Warning.
Note: Always replace disc brake pads in axle sets.
Inspect the fluid level in the brake master cylinder reservoir.
If the brake fluid level is midway between the maximum-full point and
the minimum allowab ...
Secondary Air Injection Pump Installation
Install the secondary air injection pump (1).
Loosely install the secondary air injection pump nut (2) and the 2 secondary
air injection pump bolts (4).
Caution: Refer to Fastener Caution.
Tighten the secondary air injection pump nut (2) an ...