Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Rear Side Door Window Weatherstrip Replacement (Sedan)

Chevrolet Sonic Repair Manual / Body / Glass & Windows / General / Rear Side Door Window Weatherstrip Replacement (Sedan)



Rear Side Door Window Weatherstrip Replacement

Callout

Component Name

Preliminary Procedures

  1. The rear door side window weatherstrip and window is serviced as one assembly. Refer to Rear Side Door Stationary Window Replacement.
  2. Remove the rear side door window . Refer to Rear Side Door Window Replacement.

1

Rear Side Door Window Weatherstrip Lower Bolt

Caution:

Refer to Fastener Caution.

Procedure

Remove the rear side door water deflector.

Tighten


9?€‰Y (80?€‰lb?€‰in)

2

Rear Side Door Window Weatherstrip Upper Screw

Procedure

  1. Pull the door weatherstrip out of the upper retainer to expose the screw.
  2. Remove the weatherstrip from the front and rear lower guides.
  3. Grasp both upper corners, pull downward releasing the weatherstrip from the door frame.
Tighten


3?€‰Y (27?€‰lb?€‰in)

3

Rear Side Door Window Weatherstrip

Procedure

  1. Insert the weatherstrip downward in the guide until fully seated.
  2. Carefully move the regulator upward for short slow intervals, while ensuring that the window remains in the guides.
  3. Inspect the door window for proper operation before installing the door trim panel.
Rear Side Door Window Weatherstrip Replacement (Hatchback)
Rear Side Door Window Weatherstrip Replacement Callout Component Name Preliminary Procedure Remove the rear side door window . ...

Rear Window Defogger Description and Operation
Rear Window Defogger System Components The rear window defogger system consist of the following components: The HVAC control module The body control module (BCM) The rear defogger ...

Other materials:

Securing Child Restraints (Right Front Passenger Seat)
This vehicle has airbags. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put the Restraint. In addition, the vehicle has a passenger sensing system which is designed to turn off the front outboard passenger frontal airbag and knee airbag under certain co ...

Camshaft Cover Installation
Clean the sealing surfaces. Note: The thickness of the sealing bead should be 2 mm (0.0787 in). Apply sealing compound to areas (1) and (2). Refer to Adhesives, Fluids, Lubricants, and Sealers. Note: The installation procedure sho ...

Transmission Fluid Pump Disassemble (6T40/45/50)
Table 1: Fluid Filter Assembly and Torque Converter Fluid Seal Disassemble Table 2: Fluid Pump Disassemble Fluid Filter Assembly and Torque Converter Fluid Seal Disassemble Fluid Filter Assembly and Torque Converter Fluid Seal Disassemble ...

© 2014-2024 Copyright www.csmans.com
 
0.0084