Chevrolet Sonic Repair Manual: Special Tools

Rear Wheelhouse Liner Replacement (Sedan - Right)

Rear Wheelhouse Liner Replacement Callout Component Name Preliminary Procedure Remove the tire and wheel assembly. Refer to Tir ...

Tire and Wheel Removal and Installation

Special Tools CH-41013 Rotor Resurfacing Kit CH-42450-A Wheel Hub Resurfacing Kit For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and support the ...

Other materials:

Tire Rotation and Required Services Every 12 000 km/ 7,500 mi
Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation. Check engine oil level and oil life percentage. If needed, change engine oil and filter, and reset oil life system. See Engine Oil  and Engine Oil Life System. Check engine coo ...

Tire and Wheel Balancing (Road Force Variation (RFV))
ALL wheel/tire assemblies must have a RFV within spec before being mounted on vehicle. Important: If a wheel/tire assembly is not within the RFV specification after match mounting, the tire must be returned to the tire manufacturer. DO NOT install tire/wheel assembly on a vehicl ...

Drive Belt Installation
Special Tools EN-955 Locking Pins EN-48488 Holding Wrench For equivalent regional tools, refer to Special Tools. Note: Ensure that the drive belt tensioner is held with EN-955?E locking pin. Install the drive belt. Move the drive belt tensioner clockwise until EN- ...