Chevrolet Sonic Repair Manual: Special Tools

Retained Accessory Power Description and Operation

Retained Accessory Power RAP Description and Operation Block Diagram K9Body Control ModuleK73Telematics Communication Interface Cont ...

Defoggers

...

Other materials:

Multi-Axis Acceleration Sensor Module Programming and Setup
Note: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the Multi-axis Acceleration Sensor or Inertia Sensor Module (IMU) is not properly configured with the correct calibration software, the Electronic Brake Control Module will ...

Steering Gear Boot Replacement
Special Tools CH-804  Tensioner For equivalent regional tools, refer to Special Tools. Removal Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Rep ...

Charge Air Cooler Inlet Air Hose Replacement
Removal Procedure Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement. Loosen the charge air cooler inlet air pipe clamp (1) at the ...