Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Valve Lifter Removal

Special Tools

EN-845 Suction Device

For equivalent regional tools, refer to Special Tools.



Note:

Mark the locations.

Remove the 16 valve lifter (1) use the EN-845 suction device .

Valve Lifter Installation
Special Tool EN-845 Suction Device For equivalent regional tools, refer to Special Tools. Note: Observe the correct locations. Note: Coat the sliding surfaces with NEW engine oil. ...

Valve Lifter Replacement
Special Tools EN-845 Suction Device For equivalent regional tools, refer to Special Tools. Removal Procedure Remove the camshaft. Refer to Camshaft Replacement. Not ...

Other materials:

Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange, remeasure the tire and wheel assembly on-vehicle runout in order to verify that the amount of runout has been reduced and brought to within tolerances. Mark the location of the high spot on the tire and wheel asse ...

Warm Up Three-Way Catalytic Converter Installation
Install the warm up three way catalytic converter (5) to the brackets and the turbocharger. Use a NEW warm up three way catalytic converter seal (2). Note: Never re-use the V-clamp. Install a NEW warm up three way catalytic converter V-clamp (1). In ...

Intake Manifold Installation
Clean the sealing surfaces. Install the intake manifold (1) along with a NEW intake manifold gasket. Caution: Refer to Fastener Caution. Install the 6 intake manifold bolts (1) and tighten to  20 Y (15 lb ft). ...

В© 2014-2026 Copyright www.csmans.com
 
0.0083