Chevrolet Sonic Repair Manual: Automatic Transmission Flex Plate Installation

Chevrolet Sonic Repair Manual / Powertrain / Engine / General / Automatic Transmission Flex Plate Installation

Special Tools

EN-652 Automatic Transmission Flex Plate Holder

For equivalent regional tools, refer to Special Tools.

Clean the automatic transmission flex plate bolt threads.

Install the automatic transmission flex plate (2) and the EN-652 holder to hold the automatic transmission flex plate (2).

Caution:

Refer to Fastener Caution.

Install the 6 NEW automatic transmission flex plate bolts (2) and tighten the bolts to 60 Y (44 lb ft)
.
Remove the EN-652 holder.

Air Conditioning Compressor Bracket Removal

Remove the 3 air conditioning compressor bracket bolts (1). Remove the air conditioning compressor bracket (2). ...

Automatic Transmission Flex Plate Removal

Special Tools EN-652 Automatic Transmission Flex Plate Holder For equivalent regional tools, refer to Special Tools. Install the EN-652 holder (1) to hold the automatic transmiss ...

Other materials:

Rear Side Door Window Outer Sealing Strip Replacement (Sedan)
Rear Side Door Window Outer Sealing Strip Replacement Callout Component Name 1 Rear Side Door Window Outer Sealing Strip Procedure Use the appropriate tool, lift one end up and pull away from the door flange t ...

Strut Assembly Removal and Installation
Special Tools CH 49375 Strut Rod Nut Socket For equivalent regional tools, refer to Special Tools Removal Procedure Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. ...

Steering Angle Sensor Centering
The steering angle sensor does not require centering often. Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment Steering gear replacement Steering column replacement Collision ...

0.0052