Chevrolet Sonic Repair Manual: Automatic Transmission Flex Plate Installation
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
- Clean the automatic transmission flex plate bolt threads.
- Install the automatic transmission flex plate (2) and the EN-652 holder to hold the automatic transmission flex plate (2).
- Install the 6 NEW automatic transmission flex plate bolts (2)
and tighten the bolts to 60 Y (44 lb ft)
.
- Remove the EN-652 holder.
Caution:
Refer to Fastener Caution.
Automatic Transmission Control Indicator Opening Cover Replacement
Automatic Transmission Control Indicator Opening Cover Replacement
Callout
Component Name
Preliminary Procedure
Remove the fron ...
Automatic Transmission Flex Plate Removal
Special Tools
EN-652 Automatic Transmission Flex Plate Holder
For equivalent regional tools, refer to Special Tools.
Install the EN-652 holder (1) to hold the automatic
trans ...
Other materials:
Recommended Fuel
Use regular unleaded gasoline with a posted octane rating of 87 or higher. If
the octane rating is less than 87, an audible knocking noise may be heard. If this
occurs, use a gasoline rated at 87 octane or higher as soon as possible. If heavy
knocking is heard when using gasoline with a higher ...
Roof Panel Joint Finish Molding Replacement
Roof Panel Joint Finish Molding Replacement
Callout
Component Name
Caution: Refer to Exterior Trim Emblem Removal Caution.
Preliminary Procedures
Begin at the rear edge of the roof panel joint finish molding an ...
Starter Replacement (LUW)
Removal Procedure
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the drivetrain and front suspension frame skid plate. Refer to
Drivet ...
0.007