Callout |
Component Name |
---|---|
Preliminary Procedure
Remove the windshield header courtesy lamp. Refer to Windshield Header Courtesy Lamp Replacement |
|
1 |
Dome Lamp Bulb |
When the System Does Not Seem to Work Properly
The RVC system may not work properly or display a clear image if:
The RVC is turned off. See “Turning the Rear Camera System On or Off” earlier
in this section.
It is dark.
The sun or the beam of headlamps are shining directly into the camera lens.
Ice, snow, mud, or anything else b ...
Body Control Module Programming and Setup
Note:
DO NOT program a control module unless directed to by a service procedure
or a service bulletin. If the control module is not properly configured
with the correct calibration software, the control module will not control
all of the vehicle features properly.
Ensure th ...
Battery Current Sensor Replacement
Removal Procedure
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Disconnect the battery current sensor from the body harness connector.
Unclip the battery current sensor from the battery tray.
Remove the battery ...