|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the windshield header courtesy lamp. Refer to Windshield Header Courtesy Lamp Replacement |
|
|
1 |
Dome Lamp Bulb |
Dome Lamp Bezel Replacement
Cargo Center Courtesy Lamp Bulb Replacement (Hatchback)Hood Ajar Indicator Description and Operation
Hood Ajar Switch
The body control module (BCM) applies B+ to the hood ajar signal circuit
and monitors the voltage to determine the position of the hood. When the hood
is closed, the switch is open and voltage remains high. When the hood is open,
the switch is closed and the voltag ...
Brake Pedal Position Sensor Replacement
Removal Procedure
Remove the instrument panel lower trim pad cover. Refer to Instrument
Panel Lower Trim Pad Cover Replacement.
Disconnect the brake pedal position sensor electrical connector.
Remove the brake pedal position sensor bolt (1).
Remove t ...
Exhaust Manifold Heat Shield Installation
Install the exhaust manifold heat shield (2).
Caution: Refer to Fastener Caution.
Install the 3 exhaust manifold heat shield bolts (1) and the washers and
tighten to 8 Y (71 lb in).
...