Callout |
Component Name |
---|---|
1 |
Purge Pipe Fittings (Qty: 2) Procedure
Disconnect the vacuum lines quick connect fitting from the evaporative emission canister purge solenoid valve. Refer to Plastic Collar Quick Connect Fitting Service. |
2 |
Evaporative Emission Canister Purge Solenoid Valve Procedure
|
Storing the Tire Sealant and Compressor Kit
The tire sealant and compressor kit is located in the rear storage area.
1. Lift the trim cover.
2. Remove the tire sealant canister (1) and the compressor (2).
To store the tire sealant canister and compressor:
1. Attach the sealant/air hose to the sealant canister inlet valve.
2. Return the ...
2-6 Clutch Piston Installation (6T30)
2-6 Clutch Piston Installation
Callout
Component Name
1
2?E Clutch Piston Assembly
Note:
Position the 2?E piston air bleed and large slot toward the
top of the case.
DT-48271 seal protector ...
Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate Installation
(6T30)
Low and Reverse and 1-2-3-4 Clutch Housing, and 1-2-3-4 Clutch Plate
Installation
Callout
Component Name
1
Low and Reverse and 1??? Clutch Housing
Note: The longer legs face the bottom of the case and the
...