Chevrolet Sonic Repair Manual: Fuel and Evaporative Emission Hose/Pipe Connection Cleaning Caution

Caution:

Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the system:

• The fuel pipe connections
• The hose connections
• The areas surrounding the connections

Evaporative Emission System Hose/Pipe Replacement

Removal Procedure Disconnect the evaporative emission pipe (1). Refer to Plastic Collar Quick Connect Fitting Service. Remove the plastic retainer  ...

Fuel and Evaporative Emission Pipe Warning

Warning: In order to reduce the risk of fire and personal injury observe the following items: Replace all nylon fuel pipes that are nicked, scratched or damaged during installation, d ...

Other materials:

Protecting Exterior Bright Metal Moldings
Caution Failure to clean and protect the bright metal moldings can result in a hazy white finish or pitting. This damage would not be covered by the vehicle warranty. The bright metal moldings on the vehicle are aluminum. To prevent damage always follow these cleaning instructions: Be sure ...

Strut Assembly Removal and Installation
Special Tools CH 49375 Strut Rod Nut Socket For equivalent regional tools, refer to Special Tools Removal Procedure Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle. ...

Cylinder Head Cleaning and Inspection
Valve Cleaning and Inspection Warning: Bodily injury may occur if the cleaning solvent is inhaled or exposed to the skin. Note: Do not scratch the valve stem with the wire brush. Clean the valves of carbon, oil and varnish. Carbon can be remove ...