|
Callout |
Component Name |
|---|---|
Preliminary Procedures
|
|
|
1 |
Fuel Tank Filler Door Latch Housing Retainer (Qty:?€‰4) Procedure
Release the 4 filler door latch housing retainers on the back of the housing. |
|
2 |
Fuel Tank Filler Door Latch Housing Procedure
Press the fuel tank filler housing outward from the fuel filler pipe and the quarter panel. |
Front Wheelhouse Liner Replacement (Rear)
Fuel Tank Filler Door ReplacementRecommended Fuel
Use regular unleaded gasoline with a posted octane rating of 87 or higher. If
the octane rating is less than 87, an audible knocking noise may be heard. If this
occurs, use a gasoline rated at 87 octane or higher as soon as possible. If heavy
knocking is heard when using gasoline with a higher ...
Air Conditioning Compressor and Condenser Hose Replacement (LUW)
Removal Procedure
Recover the refrigerant. Refer to Refrigerant Recovery and Recharging.
Disconnect the A/C refrigerant pressure sensor electrical connector.
Remove air conditioning compressor and condenser hose nut (1).
Remove air conditioning compressor ...
Crankshaft and Bearing Cleaning and Inspection
Special Tools
EN-45059 Torque Angle Sensor Kit
GE-571-B Dial Gauge
For equivalent regional tools, refer to Special Tools.
Crankshaft End Play, Check
Note: Crankshaft attached with crankshaft bearing caps.
Install the GE-571-B gauge (1).
...