Callout |
Component Name |
---|---|
Preliminary Procedures
|
|
1 |
Hood Hinge Bolt (Qty:?€‰2) Caution: Refer to Fastener Caution.
22?€‰Y (16?€‰lb?€‰ft) |
2 |
Hood Hinge Procedure
Adjust the hood and hinge if needed. Refer to Hood Adjustment. |
Horns System Description and Operation
System Description
The horn system consists of the following components:
HORN fuse
Underhood fuse block (contains PCB horn relay)
Horn switch
Horn
Body control module (BCM)
K84Keyless
Entry
Control
ModuleS33Horn
SwitchK73Telematics
Communication
In ...
Air Inlet Grille Panel Replacement
Air Inlet Grille Panel Replacement
Callout
Component Name
Preliminary Procedure
Remove both wiper arm assemblies. Refer to Windshield Wiper Arm
Replacement.
Remove both outer hood rear seals. Refer to Hood Rear Seal Repla ...
Control Solenoid Valve and Transmission Control Module Assembly Inspection
Verify the conditions listed below do not exist. Carefully
inspect the control solenoid valve assembly connectors and pins (1, 2, 4, 6)
for the condition. Repair or replace as necessary.
Damage
Bent pins
Debris
Broken retaining tab
Contamination
Verify there is ...