|
Callout |
Component Name |
|---|---|
|
1 |
Instrument Panel Cluster Upper Bezel Procedures
Use a flat bladed plastic trim tool in order to disengage the retainers securing the instrument panel cluster upper bezel to the instrument cluster assembly. |
Front Floor Console Replacement
Instrument Panel Accessory Upper Trim Plate ReplacementEngine Coolant Fan Replacement (LUV)
Engine Coolant Fan Replacement
Callout
Component Name
Preliminary Procedure
Remove the engine coolant fan shroud. Refer to Engine Coolant Fan Shroud
Replacement.
1
Engine Coolant Fan Motor Elect ...
Clutch System Description and Operation
Clutch Spin Down Time
Inspect the clutch spin down time as follows:
Apply the parking brake and block the vehicle wheels.
Shift the manual transmission into NEUTRAL.
Start the engine. Run the engine at idle speed.
Engage the clutch.
Disengage the clutch. Wait 9 seconds.
...
Synchronizers Disassemble
1st/2nd Gear Synchronizer
iv
Note: When servicing the synchronizers, retain them in the
same order that they are removed. Keep the synchronizer components together
and mark them to identify correct location.
Remove the 1st/2nd gear synchronizer hub ...