Chevrolet Sonic manuals

Chevrolet Sonic Repair Manual: Instrument Panel Upper Trim Panel Replacement - Right Side

Chevrolet Sonic Repair Manual / Body / Body Interior / Trim Panels/Welts / Instrument Panel Upper Trim Panel Replacement - Right Side



Instrument Panel Upper Trim Panel Replacement - Right Side

Callout

Component Name

Preliminary Procedure

  1. Disable the SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the instrument panel center molding. Refer to Instrument Panel Center Molding Replacement.
  3. Remove the instrument panel center upper molding. Refer to Instrument Panel Center Upper Molding Replacement.
  4. Remove the instrument panel lower compartment. Refer to Instrument Panel Lower Compartment Replacement.
  5. Remove the right instrument panel accessory upper trim plate. Refer to Instrument Panel Accessory Upper Trim Plate Replacement.
  6. Remove the right instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement.

1

Instrument Panel Inflatable Restraint Module Fasteners (Qty:?€‰2)

Caution:

Refer to Fastener Caution.

Tighten


10Y 89?€‰lb?€‰in

2

Instrument Panel Upper Trim Panel Fastener (Qty:?€‰3)

3

Instrument Panel Upper Trim Panel

Procedures

  1. Use a flat bladed plastic trim tool in order to disengage the retainers securing the upper trim panel to the instrument panel assembly.
  2. Disconnect the electrical connections.
  3. When replacing the instrument panel upper trim panel, transfer all necessary components.
Instrument Panel Upper Trim Panel Replacement - Left Side
Instrument Panel Upper Trim Panel Replacement - Left Side Callout Component Name Preliminary Procedure Remove the instrument cluste ...

Liftgate Trim Finish Panel Replacement (Hatchback)
Liftgate Trim Finish Panel Replacement Callout Component Name 1 Liftgate Trim Finish Panel Fastener Caution: Ref ...

Other materials:

Engine Coolant Air Bleed Hose Replacement (LUV)
Engine Coolant Air Bleed Hose Replacement Callout Component Name 1 Engine Coolant Air Bleed Hose Clamp (Qty: 2) Special Tools BO-38185 Hose Clamp Pliers For equivalent regional tools, refer to Special T ...

Camshaft Cover Installation
Clean the sealing surfaces. Note: The thickness of the sealing bead should be 2 mm (0.0787 in). Apply sealing compound to areas (1) and (2). Refer to Adhesives, Fluids, Lubricants, and Sealers. Note: The installation procedure sho ...

Throttle Body Heater Outlet Hose Replacement (LUW)
Throttle Body Heater Outlet Hose Replacement Callout Component Name Preliminary Procedure Drain the cooling system. Refer to Cooling System Draining and Filling. Remove the air cleaner outlet duct. Refer to Air Cle ...

© 2014-2022 Copyright www.csmans.com
   
0.0061