Chevrolet Sonic Repair Manual: Engine Oil Cooler Coolant Inlet Hose Replacement (LUV)

Chevrolet Sonic Repair Manual / Powertrain / Engine / Engine Lubrication / Information / Engine Oil Cooler Coolant Inlet Hose Replacement (LUV)

Engine Oil Cooler Coolant Inlet Hose Replacement
Callout	Component Name
Preliminary Procedure Open the hood. Drain the cooling system. Refer to Cooling System Draining and Filling.
1	Oil Cooler Inlet Hose Clamp Procedure Place a drain pan below the vehicle. Remove / install engine coolant air bleed hose clamp.
2	Oil Cooler Inlet Hose Clamp Procedure Place a drain pan below the vehicle. Remove / install engine coolant air bleed hose clamp.
3	Oil Cooler Inlet Hose

Engine Oil Cooler Assemble

Caution: Refer to Fastener Caution. Install the engine oil filter cap (1) along with a NEW seal ring (2) and a NEW oil filter element (3) and tighten to ...

Engine Oil Cooler Disassemble

Remove the oil cooler coolant inlet hose clamp (2). Remove the oil cooler coolant inlet hose (1). Remove the oil cooler coolant inlet pipe bolt (7) Remove the oil c ...

Other materials:

Drive Range, First Gear Engine Braking (Gen 1)
When the gear selector lever is moved to the Drive (D) range from the Neutral (N) position, the transmission will provide engine braking. In this operating range, the normally-low 1234 pressure control solenoid 5 is commanded ON and, in the engine braking mode, the following changes occur with ...

Engine Mount Replacement
Engine Mount Replacement Callout Component Name Preliminary Procedures Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement. Install the engine support fixture. Refer to Engine Support Fixture. ...

Input, Reaction, and Output Carrier Assemble (Gen 1)
Input, Reaction, and Output Carrier Assemble Callout Component Name 1 3? Reverse and 4?? Clutch Housing Assembly 2 Reaction Carrier Sun Gear Thrust Bearing 3 Reacti ...

0.0053