If equipped, LDW is intended to help avoid unintentional lane departures at speeds
of 56 km/h (35 mph) or greater. LDW uses a camera sensor to detect the lane markings.
The LDW indicator, , appears green if
a lane marking is detected. If the vehicle departs the lane, the indicator will
change to amber and flash. In addition, beeps will sound.
See Lane Departure Warning (LDW).
Tire and Wheel Balancing (Road Force Variation (RFV))
ALL wheel/tire assemblies must have a RFV within spec before being mounted
on vehicle.
Important: If a wheel/tire assembly is not within the RFV specification
after match mounting, the tire must be returned to the tire manufacturer.
DO NOT install tire/wheel assembly on a vehicl ...
Drive Belt Tensioner Installation
Install the drive belt tensioner (1).
Install the upper drive belt tensioner bolt (2).
Install the lower drive belt tensioner bolt (3).
Caution: Refer to Fastener Caution.
Tighten the lower drive belt tensioner bolt (M8) to 22 Y (16 ...
Transmission Fluid Pump Disassemble (6T30)
Table 1:
Fluid Filter Assembly and Torque Converter Fluid Seal
Disassemble
Table 2:
Fluid Pump Disassemble
Fluid Filter Assembly and Torque Converter
Fluid Seal Disassemble
Fluid Filter Assembly and Torque Converter Fluid Seal Disassemble
...