Callout |
Component Name |
---|---|
1 |
Liftgate Trim Finish Panel Fastener Caution: Refer to Fastener Caution. |
2 |
Liftgate Trim Finish Panel Retainer (Qty:?€‰8) |
3 |
Liftgate Trim Finish Panel Assembly Procedure
Use a trim tool or equivalent to aid in removal. |
OnStar Description and Operation
This OnStar® system consists of the following components:
Telematics communication interface control module
OnStar® three button assembly
Microphone
Cellular antenna
Navigation antenna
Bluetooth® antenna (If equipped)
Back up battery (If equipped)
This system also interfaces wi ...
Air Inlet Valve Actuator Replacement (LHD)
Air Inlet Valve Actuator Replacement
Callout
Component Name
Preliminary Procedures
Remove the instrument panel compartment. Refer to Instrument Panel
Lower Compartment Replacement.
Reposition any wiring or hoses to gain a ...
Synchronizers Assemble
1st/2nd Gear Synchronizer
iv
Note: When servicing the synchronizers, retain them in the
same order that they are removed. Keep the synchronizer components together
and mark them to identify correct location.
Install the synchronizer inserts (1) into ...