Callout |
Component Name |
---|---|
1 |
Liftgate Weatherstrip Procedure
Clean the area where the seal will be mounted. Use a suitable solvent with a mixture of 50?€‰percent isopropyl alcohol and 50?€‰percent water by volume, or high-flash naphtha. |
Key with Integrated Transmitter Programming
Keys can be programming in various ways using the procedures outlined below.
Using the Replacing Keys procedures will first erase all the known keys from the
vehicle. Any existing keys and any new keys will then be programmed. This procedure
should be used any time a key is required to be unle ...
Camber Description
Camber is the tilting of the wheels from the vertical when viewed from the front
of the vehicle. When the wheels tilt outward at the top, the camber is positive (+).
When the wheel tilts inward at the top, the camber is negative (−). The amount of
tilt is measured in degr ...
Replacing Engine Gaskets
Gasket Reuse and Applying Sealants
Do not reuse any gasket unless specified.
Gaskets that can be reused will be identified in the service procedure.
Do not apply sealant to any gasket or sealing surface unless called
out in the service information.
Separating ...