Chevrolet Sonic Repair Manual: Load Compartment (Hatchback)
The load compartment cover can be used to conceal objects under it or removed and placed on the bottom of the load compartment to carry larger loads.
To remove the load compartment cover:
- Lift up on the load compartment cover and pull out.
- Store the load compartment cover on the bottom of the load compartment.
To install the load compartment cover:
- Align the front sides of the load compartment cover into the slots on both sides at the front of the load compartment.
- Lower the load compartment cover onto the lip around the load compartment.
Instrument Panel Storage
Lift up on the lever to open.
If equipped, the storage area has an auxiliary input jack and USB port inside. ...
SIR Inflator Module Handling and Storage Warning
Warning: When carrying an undeployed inflator module:
Do not carry the inflator module by the wires or connector.
Make sure the air bag opening points away from you.
When storing an u ...
Other materials:
Drivetrain and Front Suspension Frame Skid Plate Replacement
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
Remove the mounting bolts (1) for the front suspension frame skid plate.
Remove the front suspension frame skid plate (2).
Installation Procedure ...
Heater Outlet Hose Replacement (LUV)
Heater Outlet Hose Replacement
Callout
Component Name
Preliminary Procedures
Drain the engine coolant. Refer to Cooling System Draining and Filling.
Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacemen ...
Crankshaft Balancer Installation
Special Tools
EN-470–B Angular Torque Wrench
EN-956?E Extension
EN-49979 Crankshaft Shock Mount Retainer
For equivalent regional tools, refer to Special Tools.
Note: The crankshaft balancer flange must fit to the hexagon of
the oil pump rotor (2) and to the two ...
0.0067