Chevrolet Sonic Owner's Manual: Lock, Unlock Settings
Select and the following may display:
- Remote Unlock Light Feedback
- Remote Lock Light & Horn Feedback
- Remote Door Unlock
Remote Unlock Light Feedback When on, the exterior lamps will flash when unlocking the vehicle with the RKE transmitter.
Select Flash Lights or Lights Off.
Remote Lock Light & Horn Feedback
Select to set what type of feedback is given when pressing
on the RKE transmitter.
Select Lights Only, Lights & Horn, Horn Only, or Off.
Remote Door Unlock
Select to set which doors will unlock when pressing
on the RKE transmitter.
Select All Doors or Driver Door. When set to Driver Door Only, the driver door
will unlock the first time is pressed
and all doors will unlock when the button is pressed a second time. When set to
All Doors, all of the doors will unlock at the first press of
.
Power Door Locks
Select and the following may display:
Auto Door Unlock
Unlocked Door Anti Lock Out
Delayed Door Lock
Auto Door Unlock
Select to set which of the doors will automatically unlock when the ve ...
Rear Camera Option
Select and the following may display:
Guidelines
Guidelines
The RVC system has a guideline overlay that can help the driver align the vehicle
when backing into a parking spot. See Rear Visio ...
Other materials:
Front Suspension Description and Operation
The front suspension has 2 primary purposes:
Isolate the driver from irregularities in the road surface.
Define the ride and handling characteristics of the vehicle.
The front suspension absorbs the impact of the tires travelling over irregular
road surfaces and dissipates this energy t ...
Tire and Wheel Assembly-to-Hub/Axle Flange Match-Mounting
Note: After remounting a tire and wheel assembly to a hub/axle flange,
remeasure the tire and wheel assembly on-vehicle runout in order to verify that
the amount of runout has been reduced and brought to within tolerances.
Mark the location of the high spot on the tire and wheel asse ...
Synchronizers Cleaning and Inspection
Note: When servicing the synchronizers, retain them in the order
that they are removed. Mark the parts to ensure the correct position for
inspection and assembly.
Clean all the synchronizer parts in a suitable cleaning
solvent and air dry all the parts.
Inspect the 1 ...
0.0076