Chevrolet Sonic Repair Manual: Fluid Passages (Gen 1)
| Figure 1: | Case - Control Valve Body Side (Left) |
| Figure 2: | Case - Pump Side (Back) |
| Figure 3: | Control Valve Body - Case Side (Left) |
| Figure 4: | Control Valve Body - Channel Plate Side (Right - No Valves) |
| Figure 5: | Pump Body - Pump Cover Side (Front) |
| Figure 6: | Pump Cover - Pump Body Side (Back) |
| Figure 7: | Spacer Plate (12) - Case Side (Left) |
| Figure 8: | Spacer Plate (402) - Channel Plate Side (Right) |
| Figure 9: | Torque Converter Clutch Housing - Pump Side (Front) |
| Figure 10: | Control Solenoid Valve Assembly with Filter Plate - Channel Plate Side (Front) |
| Figure 11: | Channel Plate - Control Solenoid Valve Assembly Side (Right) |
| Figure 12: | Channel Plate - Control Valve Body Side (Left) |
Engine Replacement (Automatic Transmission)
Special Tools
J-45859 Wheel Drive Shaft Remover
CH-807 Closure Plugs
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the battery and battery tr ...
Fluid Passages (Gen 2)
Figure 1:
Torque Converter and Differential Housing -
Case Side
Figure 2:
Fluid Pump Body - Fluid Pump Cover Side
Figure 3:
Fluid Pump Cover - Fluid Pump Bod ...
Other materials:
Fuel Tank Filler Door Replacement
Fuel Tank Filler Door Replacement
Callout
Component Name
1
Fuel Tank Filler Door
Procedure
Position the fuel tank filler door to the full open position. Using light
outward sliding pressure on the filler door, ...
Control Valve Body Cover Replacement
Removal Procedure
Disconnect the battery negative cable. Refer to
Battery Negative Cable Disconnection and Connection.
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle.
Remove the front bumper fascia opening lower cover.
Refer to Front Bumper ...
Clutch and Differential Housing Cleaning and Inspection
Warning: Wear safety glasses to avoid injury when using compressed
air or any cleaning solvent. Bodily injury may occur if fumes are inhaled
or if skin is exposed to chemicals.
Clean the clutch housing (1) with a suitable solvent.
Air dry all the parts.
Inspect ...
0.0057