| Figure 1: | Torque Converter and Differential Housing - Case Side |
| Figure 2: | Fluid Pump Body - Fluid Pump Cover Side |
| Figure 3: | Fluid Pump Cover - Fluid Pump Body Side |
| Figure 4: | Case - Torque Converter and Differential Housing Side |
| Figure 5: | Case - Control Valve Body Side |
| Figure 6: | Control Valve Body Spacer Plate Assembly - Case Side |
| Figure 7: | Control Valve Body - Case Side |
| Figure 8: | Control Valve Body - Channel Plate Side |
| Figure 9: | Channel Plate to Valve Body Spacer Plate Assembly - Channel Plate Side |
| Figure 10: | Channel Plate - Control Valve Body Side |
| Figure 11: | Channel Plate - Control Solenoid (w/Body and TCM) Valve Assembly Side |
| Figure 12: | Control Solenoid (w/Body and TCM) Valve Assembly - Channel Plate Side |
Fluid Passages (Gen 1)Engine Mount Bracket Installation
Install the engine mount bracket (2).
Caution: Refer to Fastener Caution.
Install the 3 engine mount bracket bolts and tighten to 60 Y (45 lb ft) + 45?E0°.
...
Fuel Tank Heat Shield Replacement
Removal Procedure
Support the fuel tank with a suitable jack.
Remove the fuel tank strap fasteners (1) and lower the fuel tank straps (2).
Remove the fuel tank heat shield fasteners (1) and remove the fuel tank
heat shield (2).
...
Clutch and Differential Housing Disassemble
Special Tools
M-680770 Universal Sliding Mallet
R-0007758 Holding Fixture
R-0407008 Counter Shaft Bearing Remover
R-0407010 Input Shaft Needle Bearing Puller and Driver
R-0407013 Gearshift Device Bushing Puller
R-0007761 Universal Handle for Pullers and Installers
T-0207928 Retai ...