
Driver's armrest

Front passenger's armrest
Basic information
The Nissan Armada power door lock system allows centralized locking and unlocking of all doors using switches located on both the driver’s and front passenger’s doors.
To lock all doors, press the switch to the lock position 1 while the doors are open, then close them.
Always double-check that the Nissan Armada Intelligent Key is not inside the vehicle before locking the doors.
To unlock all doors, press the switch to the unlock position 2.
Lockout protection
The Nissan Armada is equipped with a lockout protection system designed to prevent the Intelligent Key from being accidentally locked inside the vehicle.
If a door is open, the doors are locked, and the Intelligent Key is detected inside, the Nissan Armada will automatically unlock the doors and emit a warning chime.
NOTE:
The Nissan Armada doors may not lock properly if the Intelligent Key is held in the same hand that operates the door handle request switch. Place the key in another hand, pocket, or bag.
CAUTION
The Nissan Armada lockout protection system may not function correctly under certain conditions:
Automatic door locks
NOTE:
The Nissan Armada automatic door unlock function can be customized through the "Vehicle Settings" menu in the vehicle information display.
Child safety rear door lock

The Nissan Armada child safety rear door lock system is designed to prevent rear doors from being opened from the inside, providing additional safety for children.
When the lever is set to the lock position 1, rear doors can only be opened from outside the Nissan Armada.
To deactivate this function, move the lever to the unlock position 2.
This feature enhances safety and gives Nissan Armada drivers greater peace of mind when traveling with passengers in the rear seats.
Basic informationGeneral Description
The factory installed tires are designed to operate satisfactorily with loads
up to and including the full rated load capacity when these tires are inflated to
the recommended pressures.
The following factors have an important influence on tire life:
Correct tire pressures
Correct wheel ...
Tire-to-Wheel Match-Mounting (Vectoring)
Note: After remounting a tire to a wheel or after replacing a tire
and/or a wheel, remeasure the tire and wheel assembly runout in order to verify
that the amount of runout has been reduced and brought to within tolerances.
Ensure that the tire and wheel assembly is properly balanced ...
Intake Manifold Replacement (LDE)
Removal Procedure
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and Connection.
Remove the throttle body assembly. Refer to Throttle Body Assembly Replacement.
Disconnect wiring harness plug.
Disconnect the pipes from ...