Callout |
Component Name |
---|---|
1 |
Radio Antenna Procedure
Rotate the mast counterclockwise in order to release the mast from the antenna base. |
Secondary Air Injection Check Valve Installation
Install a NEW secondary air injection check valve gasket (1).
Install the secondary air injection check valve (2).
Caution: Refer to Fastener Caution.
Install the 3 secondary air injection check valve bolts (3) and tighten
to 22 Y (16& ...
Manual Shift Shaft and Seal Replacement
Special Tools
DT-45201 Cooler Line Seal Remover
DT-49101 Seal Installer
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Remove the battery tray. Refer to
Battery Tray Replacement.
Remove the manual shaft and position switch assembly.
Refer ...
Transmission Fluid Cooler Flushing and Flow Test
GM studies indicate that plugged or restricted transmission oil coolers and pipes
cause insufficient transmission lubrication and elevated operating temperatures
which can lead to premature transmission failure. Many repeat repair cases could
have been prevented by following published procedur ...