|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the windshield side garnish molding. Refer to Windshield Side Garnish Molding Replacement. |
|
|
1 |
Radio Windshield Side Garnish Molding Speaker Procedure
Depress tabs to remove speaker. |
Radio Replacement (Without US8)
Radio and Telephone Control Switch ReplacementDrum Brake Adjusting Hardware Inspection
Warning: Refer to Brake Dust Warning.
Visually inspect the adjuster actuator spring (1) for the following conditions:
Excessive stretching
Excessive bending
Excessive corrosion
Broken
Missing
If any of the conditions listed were found, the adjuster actu ...
Drive Range, First Gear Engine Braking (Gen 1)
When the gear selector lever is moved to the Drive (D) range from the Neutral
(N) position, the transmission will provide engine braking. In this operating range,
the normally-low 1234 pressure control solenoid 5 is commanded ON and, in the engine
braking mode, the following changes occur with ...
Throttle Body Heater Inlet Pipe Replacement (LUW)
Throttle Body Heater Inlet Pipe Replacement
Callout
Component Name
Preliminary Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling.
1
Throttle Body Heater Inlet Pipe
...