|
Callout |
Component Name |
|---|---|
|
Preliminary Procedure
Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation. |
|
|
1 |
Rear Wheelhouse Panel Liner Extension Nut (Qty:?€‰2) Caution: Refer to Fastener Caution. |
|
2 |
Rear Wheelhouse Panel Liner Extension |
Rear Compartment Lid Applique Replacement
Special ToolsTire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS).
The low tire pressure warning light alerts to a significant loss in pressure
of one of the vehicle's tires. If the warning light comes on, stop as soon as possible
and inflate the tires to the recommended pressure shown on the T ...
TPMS Sensor Matching Process
Each TPMS sensor has a unique identification code. The identification code needs
to be matched to a new tire/wheel position after rotating the tires or replacing
one or more of the TPMS sensors. The TPMS sensor matching process should also be
performed after replacing a spare tire with a road ...
Exhaust Manifold Heat Shield Installation
Install the exhaust manifold heat shield (2).
Caution: Refer to Fastener Caution.
Install the 3 exhaust manifold heat shield bolts (1) and the washers and
tighten to 8 Y (71 lb in).
...