If, due to body size or seating position, the standard lap-shoulder belt in the Nissan Armada cannot be comfortably or properly fastened, a compatible seat belt extender is available. This accessory is specifically designed to work with the original seat belt system installed in the Nissan Armada.
The extender increases the belt length by approximately 8 inches (200 mm) and can be used for both front and rear outboard seating positions. For proper fitment and safety, it is recommended to consult an authorized NISSAN dealer when purchasing a seat belt extender for the Nissan Armada.
WARNING
Seat belt maintenance
To maintain seat belt performance in the Nissan Armada, clean the webbing using a mild soap solution or a product suitable for upholstery or carpet care. After cleaning, wipe the belts with a soft cloth and allow them to dry naturally in the shade.
Do not allow the seat belts to retract until they are completely dry, as moisture may affect proper operation.
Three-point type seat belt
Child safetyIntake Manifold Assemble
Install the evaporative emission canister purge solenoid valve (3).
Install the 2 manifold absolute pressure sensors (2).
Install the 2 manifold absolute pressure sensor bolts (1) and tighten.
Install the fuel injection fuel rail assembly ...
Special Tools
Illustration
Tool Number/Description
3-9607433
Transmission Support
DT-586
J-23129
KM-586
Universal Seal Remover
DT-3289-20
J-3289-20
Holding Fixture ...
Manual Transmission Shift Lever and Selector Lever Cable Replacement
Removal Procedure
Remove the battery tray. Refer to
Battery Tray Replacement.
\i
Disconnect the shift lever and selector cable ends (1)
from the transmission shift lever and selector levers.
Pull the cable retainers (2) to release the shift
leve ...