|
Callout |
Component Name |
|---|---|
|
1 |
Hose Retainer (QTY:2) Note: Squeeze the retainer on opposite sides to release. |
|
2 |
Secondary Air Injection Pipe. Procedure
Disconnect the pipe from the secondary air injection pump and the air cleaner. |
Secondary Air Injection Check Valve Replacement
Secondary Air Injection Pump InstallationWhat to Add
Use only new DOT 3 brake fluid from a sealed container. See Recommended Fluids
and Lubricants.
Always clean the brake/clutch fluid reservoir cap and the area around the cap
before removing it. This helps keep dirt from entering the reservoir.
Warning
With the wrong kind of fluid in the brake/ ...
Engine Oil Cooler Pipe Replacement (LUW)
Engine Oil Cooler Pipe Replacement
Callout
Component Name
Preliminary Procedures
Drain the cooling system. Refer to Cooling System Draining and Filling.
Remove the exhaust manifold with catalytic converter. Refer to Exhaus ...
Water Pump Pulley Replacement (LUW)
Removal Procedure
Remove the air cleaner housing. Refer to Air Cleaner Assembly Replacement.
Support the engine with a suitable jack.
Remove the engine mount. Refer to Engine Mount Replacement.
Raise engine to access the bolts.
Loosen the 3 water pu ...