|
Callout |
Component Name |
|---|---|
|
1 |
Secondary Air Injection Pump Inlet Pipe Note: Squeeze the retainer on opposite sides to release. |
|
2 |
Secondary Air Injection Pump Outlet Pipe Note: Squeeze the retainer on opposite sides to release. |
|
3 |
Secondary Air Injection Pump Electrical Connector |
|
4 |
Secondary Air Injection Pump Bolt Caution: Refer to Fastener Caution.
22 Y (16 lb ft) |
|
5 |
Secondary Air Injection Pump Nut Tighten
22 Y (16 lb ft) |
|
6 |
Secondary Air Injection Pump |
Secondary Air Injection Pump Removal
Secondary Air Injection System DescriptionFront Bumper Fascia Center Support Bracket Replacement
Front Bumper Fascia Center Support Bracket Replacement
Callout
Component Name
Preliminary Procedure
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement.
1
Front Bumper Fascia ...
Steering Linkage Inner Tie Rod Inspection
Special Tools
GE-8001 Dial Indicator Set
For equivalent regional tools, refer to Special Tools.
Note: This inspection procedure does not supersede local government
required inspections that have more stringent requirements.
Turn the ignition key to the ON position with the eng ...
Heater Inlet Hose Replacement (LUV)
Heater Inlet Hose Replacement
Callout
Component Name
Preliminary Procedures
Drain the engine coolant. Refer to Cooling System Draining and Filling.
Remove the charge air cooler outlet hose. Refer to Charge Air Cooler
...