Chevrolet Sonic Repair Manual: Side Windows

Urethane Adhesive Description

For replacement of any adhesive-installed window, use the full cut method only. Use an adhesive that is approved by GM, Specification GMW-15672. Use these materials based on specific manufacturer. D ...

Power Windows Description and Operation

Power Window System Components The power window system consists of the following components: Driver window switch Front passenger window switch Left rear window switch Right re ...

Other materials:

Tire-to-Wheel Match-Mounting (Vectoring)
Note: After remounting a tire to a wheel or after replacing a tire and/or a wheel, remeasure the tire and wheel assembly runout in order to verify that the amount of runout has been reduced and brought to within tolerances. Ensure that the tire and wheel assembly is properly balanced ...

Relay Replacement (Attached to Wire Harness)
Removal Procedure Locate the relay. Refer to the Master Electrical Component List to locate the relay in the vehicle. Remove any fasteners which hold the relay in place. Remove any connector position assurance (CPA) devices or secondary locks. Note: Use care w ...

Heater Outlet Hose Replacement (LDE, LUW)
Special Tools BO-38185 Hose Clamp Pliers For equivalent regional tools, refer to Special Tools. Removal Procedure Drain the cooling system. Refer to Cooling System Draining and Filling. Disengage the heater outlet hose quick connect clip (1) at the heater ...