Caution:
Refer to Fastener Caution.
.
Brake Rotor Thickness Variation Measurement
Warning: Refer to Brake Dust Warning.
Note: Any disc brake rotor that exhibits thickness variation exceeding
the maximum acceptable level must be refinished or replaced. Thickness variation
exceeding the maximum acceptable level can cause brake pulsation.
If the inboard fricti ...
Scrub Radius Description
Ideally, the scrub radius is as small as possible. Normally, the SAI angle and
the centerline of the tire and the wheel intersect below the road surface, causing
a positive scrub radius. With struts, the SAI angle is much larger than the long
arm/short arm type of suspension. This allows the S ...
Camshaft Timing Chain Inspection
Special Tools
EN-952 Fixing Pin
EN-953-A Fixing Tool
EN-49977-100 Transmitter Disc Fixation
For equivalent regional tools, refer to Special Tools.
Remove the ignition coil. Refer to Ignition Coil Replacement.
Remove the camshaft cover. Refer to Camshaft Cover Replacement.
...