Chevrolet Sonic Repair Manual: Cylinder Head

2-6 Clutch Piston Installation (6T40/45/50)

2-6 Clutch Piston Installation Callout Component Name 1 2?E Clutch Piston Assembly Note: Position the ...

Cylinder Head Assemble

Special Tools EN-958 Valve Stem Seal Installer EN-8062 Valve Spring Compressor EN-8062-5 Adapter EN-50717-2 Compressor Assembly of EN-50717 Kit For equivalent regional tools, refer to S ...

Other materials:

How to Add Coolant to the Coolant Surge Tank
Caution This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged. If no problem is found, check to see if coolant is visible in the coolant surge tank. If coolant is visible but the coolant level is not at t ...

Rear Suspension Description and Operation
This vehicle has a beam rear suspension system consisting of the following components: An axle with integral trailing arms A cross beam Two coil springs Two standard shock absorbers Axle Assembly The axle assembly attaches to the underbody through a rubber bushing and brac ...

Turbocharger Installation
Special Tool EN-49942 Holding Wrench For equivalent regional tools, refer to Special Tools. Clean the sealing surfaces. Replace the connect fittings on the turbocharger coolant feed pipe and the turbocharger coolant return pipe. Refer to Turbocharger Disassemble and Turbocharger Ass ...