Chevrolet Sonic Repair Manual: Engine Front Cover Gasket Removal

Engine Front Cover Gasket Installation

Clean the sealing surfaces and remove all remains of old sealing compound material. Note: The thickness of the sealing bead should be 2 mm (0.0787 in). App ...

Engine Front Cover and Oil Pump Assemble

Oil Pump Installation Note: The oil pump slide spring and pin, as well as the slide seal and slide seal spring can be ordered as single parts. All other oil pump co ...

Other materials:

Finish Care
Application of aftermarket clearcoat sealant/wax materials is not recommended. If painted surfaces are damaged, see your dealer to have the damage assessed and repaired. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, ...

Tire and Wheel Balancing (Wheel Pilot Bore Greasing)
Beginning with MY 2011 vehicle, pilot bore grease should be applied. To enable this, grease must be applied to the pilot bore to prevent the wheel from seizing onto the hub. Refer to Adhesives, Fluids, Lubricants, and Sealers for pilot bore lubricant part number. Do not use any pene ...

Manual Transmission Shift Lever and Selector Lever Cable Replacement
Removal Procedure Remove the battery tray. Refer to Battery Tray Replacement. \i Disconnect the shift lever and selector cable ends (1) from the transmission shift lever and selector levers. Pull the cable retainers (2) to release the shift leve ...